The Sentry™ Water-Cable Barrier Wall

  • The SentryT Water-Cable Barrier Wall has been tested and passed all TL-2 & TL-3 light weight 1,807lbs (820kg) and heavy weight 4,409 lbs (2,000kg) impacts at 45mph (70kph)and 62.5mph (100kph) impacts.
  • SentryT, when filled with 242 gallons (9160 liters) of water weights approximately 2,000lbs (907kg), and is 42" (107cm) tall, 72" (183cm) long and 22.5" (57cm) wide.
  • Sentry'sT eleven interlocking knuckles on each end are positively linked together with a 1 1/8" (3cm) diameter galvanized hollow steel T-pin witht a steel keeper at the bottom end.
  • Integrally molded into the SentryT are four 3/8" (9.5mm) diameter stranded steel cables, galvanized for corrosion resistance. These (4) cables prevent the impacting vehicle from penetrating the barrier wall. At each cable end is a corrosion resistant steel bushing.
  • The bushing is wrapped 360º around its O.D. with a loop of the 3/8" (9.5mm) diameter stranded steel cable. The bushing and cable assemblies are integrally molded into the connecting lugs, at four of the lug positons, at each end of the barrier wall.

Sentry Wall Features

  • Three (3) Longitudinal Saw Tooth Anti-Vehicle Climbing Ribs
  • Lugs on Top for Storage and Transport
  • Lift lifting holes

 

 

 
 

 
Products